[Scip] Fwd: SCIP installation
Stefan Vigerske
stefan at math.hu-berlin.de
Thu Aug 16 14:09:21 MEST 2012
Hi,
I think you need to recreate the source code dependency files.
The easiest should be to just remove src/depend.* in your project and to
call
make depend OPT=opt
make depend OPT=dbg
Stefan
On 08/16/2012 01:01 AM, Jose L Walteros wrote:
> Hi,
>
> Thanks Stefan. At the end, I was not able to compile ZIMPL so I ended up
> setting it to false, and now works perfectly for the binpacking example!
>
> I have other question, though. I am trying to run my code (the one I coded
> before in my mac). Since the code i'm running is outside the SCIP folder,
> in the makefile I replaced the line SCIPDIR=../.. with the actual path of
> SCIP, to set up the propper path. The problem is that I am getting now:
>
> make: *** No rule to make target `../../src/objscip/objscip.h', needed by
> `obj/O.mingw.x86.gnu.opt/main_vrp.o'. Stop.
>
> is there anything else should I modify in the makefile?
>
> The code runs perfectly if I place it within the examples folder of SCIP,
> but of course that is something that I want to avoid. I am sorry to bother
> you with these trivialities. That is the problem when for any reason one
> have to change well established paradigms (mac to windows in my case).
>
> Thanks in advance.
>
> -J
>
>
>
> On Wed, Aug 15, 2012 at 3:36 AM, Stefan Vigerske
> <stefan at math.hu-berlin.de>wrote:
>
>> Hi,
>>
>>
>> On 08/15/2012 01:12 AM, Jose L Walteros wrote:
>>
>>> Hi, I do have pcre installed.
>>>
>>> I now have the following error
>>>
>>> ** Building ZIMPL library
>>> "/c/GNU/SCIP/scipoptsuite-3.0.**0/zimpl-3.3.0/lib/libzim
>>> pl.mingw.x86.gnu.opt.a".
>>> make[2]: Entering directory `/c/GNU/SCIP/scipoptsuite-3.0.**
>>> 0/zimpl-3.3.0'
>>> -> linking bin/zimpl-3.3.0.mingw.x86.gnu.**normal.opt
>>> c:/mingw/bin/../lib/gcc/**mingw32/4.7.0/../../..\**
>>> libpcreposix.a(pcreposix.o):**pcrep
>>> osix.c:(.text+0xd3): undefined reference to `__imp__pcre_free'
>>> c:/mingw/bin/../lib/gcc/**mingw32/4.7.0/../../..\**
>>> libpcreposix.a(pcreposix.o):**pcrep
>>> osix.c:(.text+0x14c): undefined reference to `__imp__pcre_compile2'
>>> c:/mingw/bin/../lib/gcc/**mingw32/4.7.0/../../..\**
>>> libpcreposix.a(pcreposix.o):**pcrep
>>> osix.c:(.text+0x179): undefined reference to `__imp__pcre_fullinfo'
>>> c:/mingw/bin/../lib/gcc/**mingw32/4.7.0/../../..\**
>>> libpcreposix.a(pcreposix.o):**pcrep
>>> osix.c:(.text+0x2c8): undefined reference to `__imp__pcre_exec'
>>> collect2.exe: error: ld returned 1 exit status
>>> make[2]: *** [bin/zimpl-3.3.0.mingw.x86.**gnu.normal.opt] Error 1
>>> make[2]: Leaving directory `/c/GNU/SCIP/scipoptsuite-3.0.**0/zimpl-3.3.0'
>>> make[1]: ***
>>> [/c/GNU/SCIP/scipoptsuite-3.0.**0/zimpl-3.3.0/lib/libzimpl.**mingw.x86.
>>> gnu.opt.a] Error 2
>>> make[1]: Leaving directory `/c/GNU/SCIP/scipoptsuite-3.0.**0'
>>> make: *** [scipbinary] Error 2
>>>
>>
>> Maybe you need a make clean before rebuilding with READLINE=false
>> USRFLAGS=-DWITH_PCRE
>>
>>
>>
>> And unfortunately I need ZIMPL since it is required for the vardata in the
>>> binpacking example.
>>>
>>
>> No, it is not. The binpacking example does not need ZIMPL.
>>
>> Note, that when you build the example, you need to pass in the same flags
>> to make as for building the SCIP library (esp. ZIMPL=false).
>>
>>
>> I generally code on a mac, where I already was able to prototype several
>>> BCP using SCIP, but the new computer I was assigned to in the lab is a W7
>>> pc. I was planning to use eclipse c/c++ for coding my own problem (I can
>>> also use VS2010, but i prefer avoiding it).
>>>
>>> Has anybody been able to compile it using eclipse or VS that could help me
>>> in case does not compile via mingw.
>>>
>>
>> There are SCIP libraries (including ZIMPL) build with MSVS on the SCIP
>> download page. If you can switch to the MS compiler, you could just use
>> these, probably also when using Eclipse as editor.
>>
>> The MinGW setup with cl, icl, or gcc should work if you disable ZIMPL, at
>> least.
>>
>> Stefan
>>
>>
>>
>>> thanks a lot. I really appreciate it.
>>>
>>> -J
>>>
>>> On Tue, Aug 14, 2012 at 4:39 PM, <michael.winkler at zib.de> wrote:
>>>
>>> Hi,
>>>>
>>>> in advance to the previous changes please compile with:
>>>>
>>>> make READLINE=false USRFLAGS=-DWITH_PCRE
>>>>
>>>> and probably you will need the pcre library for windows.
>>>>
>>>> http://gnuwin32.sourceforge.**net/packages/pcre.htm<http://gnuwin32.sourceforge.net/packages/pcre.htm>
>>>>
>>>> or if you do not ZIMPL then compile with
>>>>
>>>> make ZIMPL=false READLINE=false
>>>>
>>>>
>>>> Best, Michael
>>>>
>>>>
>>>> Hi, it start compiling but now, I have this error
>>>>>
>>>>> src/iread.c:37:19: fatal error: regex.h: No such file or directory
>>>>> compilation terminated.
>>>>> make[2]: *** [obj/O.mingw.x86.gnu.normal.**opt/iread.o] Error 1
>>>>> make[2]: Leaving directory `/c/GNU/SCIP/scipoptsuite-3.0.**
>>>>> 0/zimpl-3.3.0'
>>>>> make[1]: ***
>>>>> [/c/GNU/SCIP/scipoptsuite-3.0.**0/zimpl-3.3.0/lib/libzimpl.**mingw.x86.
>>>>> gnu.opt.a] Error 2
>>>>> make[1]: Leaving directory `/c/GNU/SCIP/scipoptsuite-3.0.**0'
>>>>> make: *** [scipbinary] Error 2
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Aug 14, 2012 at 3:42 PM, <michael.winkler at zib.de> wrote:
>>>>>
>>>>> Hi,
>>>>>>
>>>>>> please try the following:
>>>>>>
>>>>>> replace in the ZIMPL directory inside the Makefile
>>>>>>
>>>>>> OSTYPE := $(shell uname -s | \
>>>>>> tr '[:upper:]' '[:lower:]' | \
>>>>>> tr '/' '_' | \
>>>>>> sed \
>>>>>> -e s/cygwin.*/cygwin/ \
>>>>>> -e s/irix../irix/ )
>>>>>>
>>>>>> by
>>>>>>
>>>>>> OSTYPE := $(shell uname -s | tr '[:upper:]' '[:lower:]' |
>>>>>> \
>>>>>> sed \
>>>>>> -e 's/cygwin.*/cygwin/' \
>>>>>> -e 's/irix../irix/' \
>>>>>> -e 's/windows.*/windows/' \
>>>>>> -e 's/mingw.*/mingw/')
>>>>>>
>>>>>>
>>>>>> and rename under the ZIMPL directory
>>>>>>
>>>>>> make/make.mingw32_nt-5.1.x86.**gnu.dbg -> make/make.mingw.x86.gnu.dbg
>>>>>> make/make.mingw32_nt-5.1.x86.**gnu.opt -> make/make.mingw.x86.gnu.opt
>>>>>>
>>>>>>
>>>>>> Best, Michael
>>>>>>
>>>>>>
>>>>>> ---------- Forwarded message ----------
>>>>>>> From: Jose L Walteros <jl.walteros at gmail.com>
>>>>>>> Date: Tue, Aug 14, 2012 at 2:08 PM
>>>>>>> Subject: Re: [Scip] SCIP installation
>>>>>>> To: Stefan Vigerske <stefan at math.hu-berlin.de>
>>>>>>>
>>>>>>>
>>>>>>> Hi Stefan,
>>>>>>>
>>>>>>>
>>>>>>> No, it didn't work I got:
>>>>>>>
>>>>>>> make READLINE=false ARCH=mingw32_nt-5.1
>>>>>>> make[1]: Entering directory `/c/GNU/SCIP/scipoptsuite-3.0.**0'
>>>>>>> /c/GNU/SCIP/scipoptsuite-3.0.**0/scip-3.0.0/make/make.**project:146:
>>>>>>> /c/GNU/SCIP/sci
>>>>>>> poptsuite-3.0.0/scip-3.0.0/**make/make.mingw.mingw32_nt-5.**1.gnu.opt:
>>>>>>> No
>>>>>>>
>>>>>> such
>>>>>>
>>>>>>> file
>>>>>>> or directory
>>>>>>> /c/GNU/SCIP/scipoptsuite-3.0.**0/scip-3.0.0/make/make.**project:297:
>>>>>>> ***
>>>>>>>
>>>>>> ZIMPL
>>>>>>
>>>>>>> requi
>>>>>>> res the ZLIB to be linked. Use either ZIMPL=false or ZLIB=true. Stop.
>>>>>>> make[1]: Leaving directory `/c/GNU/SCIP/scipoptsuite-3.0.**0'
>>>>>>>
>>>>>>>
>>>>>>> The problem begins when ZIMPL is being compiled. Is there anything
>>>>>>>
>>>>>> that I
>>>>>>
>>>>>>> can change in the ZIMPL makefile that you can think of?
>>>>>>>
>>>>>>> I compiled it with
>>>>>>>
>>>>>>> ZIMPL=false ZLIB=false READLINE=false and it worked, but when I tried
>>>>>>>
>>>>>> to
>>>>>>
>>>>>>> compile the bin-packing example it didn't worked. I assume it requires
>>>>>>> ZIMPL for the input files, right?
>>>>>>>
>>>>>>> Any suggestions?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Aug 14, 2012 at 1:56 PM, Stefan Vigerske
>>>>>>> <stefan at math.hu-berlin.de>**wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>>
>>>>>>>> try
>>>>>>>>
>>>>>>>> make READLINE=false ARCH=mingw32_nt-5.1
>>>>>>>>
>>>>>>>> But I think that this configuration hasn't been tested for a while.
>>>>>>>>
>>>>>>>> Stefan
>>>>>>>>
>>>>>>>>
>>>>>>>> On 08/14/2012 07:18 PM, Jose L Walteros wrote:
>>>>>>>>
>>>>>>>> Hi all,
>>>>>>>>>
>>>>>>>>> I am trying to install the latest version of SCIP Optimization Suit
>>>>>>>>> 3.0.0
>>>>>>>>> for windows using minGW 5.0.5. I have already installed ZLib and GMP
>>>>>>>>>
>>>>>>>> (I
>>>>>>
>>>>>>> double checked and the .h and .a are in the correct place).
>>>>>>>>>
>>>>>>>> Everything
>>>>>>
>>>>>>> seems to be in place to me. However, when I am trying to install
>>>>>>>>>
>>>>>>>> SCIP
>>>>>>
>>>>>>> using
>>>>>>>>>
>>>>>>>>> make READLINE=false
>>>>>>>>>
>>>>>>>>> I get the following error while building the ZIMPL library:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ** Building ZIMPL library
>>>>>>>>> "/c/GNU/SCIP/scipoptsuite-3.0.****0/zimpl-3.3.0/lib/libzim
>>>>>>>>> pl.mingw.x86.gnu.opt.a".
>>>>>>>>> make[2]: Entering directory `/c/GNU/SCIP/scipoptsuite-3.0.****
>>>>>>>>> 0/zimpl-3.3.0'
>>>>>>>>> Makefile:126: make/make.mingw32_nt-6.1.x86.****gnu.opt: No such
>>>>>>>>> file
>>>>>>>>>
>>>>>>>> or
>>>>>>
>>>>>>> directory
>>>>>>>>> make[2]: *** No rule to make target `make/make.mingw32_nt-6.1.x86.*
>>>>>>>>> ***
>>>>>>>>> gnu.opt'.
>>>>>>>>> Sto
>>>>>>>>> p.
>>>>>>>>> make[2]: Leaving directory
>>>>>>>>> `/c/GNU/SCIP/scipoptsuite-3.0.****0/zimpl-3.3.0'
>>>>>>>>> make[1]: ***
>>>>>>>>>
>>>>>>>>> [/c/GNU/SCIP/scipoptsuite-3.0.****0/zimpl-3.3.0/lib/libzimpl.***
>>>> *mingw.x86.
>>>>
>>>>> gnu.opt.a] Error 2
>>>>>>>>> make[1]: Leaving directory `/c/GNU/SCIP/scipoptsuite-3.0.****0'
>>>>>>>>> make: *** [scipbinary] Error 2
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I checked the directory: make/ and indeed the file:
>>>>>>>>>
>>>>>>>>> make.mingw32_nt-6.1.x86.gnu.****opt
>>>>>>>>>
>>>>>>>>> does not exists there, however there is a file
>>>>>>>>>
>>>>>>>>> make.mingw32_nt-5.1.x86.gnu.****opt
>>>>>>>>>
>>>>>>>>> Could you please help me with this?
>>>>>>>>>
>>>>>>>>> -J
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ______________________________****_________________
>>>>>>>>> Scip mailing list
>>>>>>>>> Scip at zib.de
>>>>>>>>> http://listserv.zib.de/****mailman/listinfo/scip<http://listserv.zib.de/**mailman/listinfo/scip>
>>>>>>>>> <
>>>>>>>>>
>>>>>>>> http://listserv.zib.de/**mailman/listinfo/scip<http://listserv.zib.de/mailman/listinfo/scip>
>>>>>>>
>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> ______________________________**_________________
>>>>>>> Scip mailing list
>>>>>>> Scip at zib.de
>>>>>>> http://listserv.zib.de/**mailman/listinfo/scip<http://listserv.zib.de/mailman/listinfo/scip>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>> ______________________________**_________________
>>> Scip mailing list
>>> Scip at zib.de
>>> http://listserv.zib.de/**mailman/listinfo/scip<http://listserv.zib.de/mailman/listinfo/scip>
>>>
>>>
>>
>
More information about the Scip
mailing list